Mounting Tips and Tricks
When it comes to securing your LH-4 to your firearm, getting it right the first time is crucial for accurate shooting. Here are some tips and tricks to ensure your scope is mounted correctly on your rifle.
Bore Sighting: Before finalizing the mounting, perform a bore sight. This gets your scope on paper before you head to the range for fine-tuning.
We recommend using ARKEN OPTICS Mounts or Rings: Select mounts designed to complement ARKEN scopes, ensuring a seamless and stable connection between your scope and rifle.
Recheck and Test: After mounting, recheck all screws for tightness. Take your rifle to the range and test for accuracy.
Clean and Degrease: Before mounting, clean the mounting surfaces on both the rifle and the scope. Remove any old oil or residue to ensure a solid connection.
Consider Recoil: If you’re mounting on a high-recoil rifle, ensure there’s enough eye relief to prevent scope bite.
Torque Wrench is Your Friend: Use a torque wrench to tighten screws to our specifications. This ensures consistent pressure and prevents over-tightening.
Apply Thread Locker Sparingly: Use a small amount of thread locker on screws and bolts to prevent them from loosening due to recoil vibrations.
Properly Level the Scope: A leveling tool helps ensure the scope is perfectly aligned with the rifle. This step is often overlooked but is crucial for accuracy.
Consult a Professional: If you’re unsure, seek advice from a professional gunsmith. They can ensure your scope is mounted perfectly.
Eye Relief: Position the scope to achieve the proper eye relief for your shooting style. This is the distance between your eye and the scope.
A well-mounted scope can make a world of difference in your shooting experience. Following these tips will help you achieve the best results with your scope.
05
Powered by FlippingBook