Illuminated Reticle Adjustment Your LH-6 scope features a daylight-visible, externally adjustable illumination for enhanced visibility.
Here’s how to effectively manage it:
1. Locating the Illumination Turret: The illumination turret is conveniently positioned opposite the windage turret for easy access. 2. Battery Cap Placement: It’s important to note that the battery cap for the illumination turret is situated on top. However, rotating the battery cap will not affect the illumination settings. 3. Activating the Illuminated Reticle: To activate the illuminated reticle, simply rotate the external dial: **1 through 9** adjusts the intensity of the illumination. **0** represents the "off" setting. 4. Conserving Battery Life: When not in use, always ensure the scope is set to **0** to prevent unnecessary drainage of the CR2032 battery. 5 . Environmental Considerations: Keep in mind that lighting conditions and the environment can impact the optimal setting. In low light, excessive illumination may lead to unintended effects. The LH-6 uses a CR2032 battery, located within the illuminated reticle turret (opposite side of the windage turret). You’ll find the battery cap positioned atop this turret. To access, install, or replace the battery, rotate the cap counterclockwise. It will gradually come off, revealing the designated battery slot. Ensure that the positive side (+) of the battery is oriented towards the top. Replace the cap on top and turn it clockwise by hand to securely seal the battery. Be sure to tighten it appropriately, taking care not to cross- thread it. Use a comfortable level of hand strength for sealing. Battery Replacement
11
Powered by FlippingBook